Source Four Savvy Section Release Notes

IssueVersionActionComponentDescription
SO-292.0.0NEWSection ObjectCan the section be rotated 45-deg on the z axis?
SO-302.0.0FixedSection ObjectAuto accessory default sizes
SO-352.0.0FixedSection ObjectWhen selecting a section class prefix using the drop-down menu in the settings dialog, the classes don't seem to be sorted in any way that makes sense. They should be alphabetical, right?
SO-392.0.0FixedRegistrationAdd registration
SO-402.0.0FixedRegistrationClean up half hat 3D
SO-412.0.0ChangedRegistrationEdit custom interface to enable and disable fields
SO-422.0.0ChangedRegistrationAdd 2018 to compiler
SO-432.0.0ChangedRegistrationBring into 2018 compliance
SO-442.0.0NEWSection ObjectImplement record for 2D symbols
SO-452.0.0NEWSection ObjectAdd classing support
SO-462.0.0FixedSection ObjectFix yoke on hang angles > 180
SO-472.0.0NEWSection ObjectShould there be CXI 2D scroll option?
SO-482.0.0ChangedSection ObjectCache 3D group
SO-492.0.0NEWSection ObjectComplete angled view libraries
SO-502.0.0ChangedSection ObjectAdd settings dialog
SO-512.0.0FixedSection ObjectFinish implementation of Symbol button
SO-522.0.0NEWSection ObjectImplement object styles
SO-532.0.0NEWSection ObjectAdd OIP item for quick selection of angles
SO-542.0.0ChangedSection ObjectDraw generic symbol if blank
SO-552.0.0NEWSection ObjectFolder from prefs
SO-562.0.0FixedSection ObjectFlip button should also switch menu item
SO-582.0.0NEWSection ObjectAdd scrollers
SO-592.0.0FixedSection ObjectUpdate scroller offsets
SO-602.0.0FixedSection ObjectCached flattened symbols need to update position when changing clamp, etc.
SO-632.0.0NEWSection PartsAutomate re-classing Section Parts files per user specification
SO-652.0.0ChangedSection ObjectAccessory Offset
SO-702.0.0FixedSection ObjectSlow Drawing of more complex 3D Objects
SO-722.0.0ChangedSection ObjectAdd pipes should follow clamps
SO-732.0.0ChangedSection ObjectComputed clearance should follow accessory
SO-742.0.0NEWSection ObjectClass for clearance circle
SO-752.0.0FixedSection ObjectCheck flip for 2D scrollers
SO-772.0.0FixedSection ObjectShort yoke toggle + show 3D yoke should reset cache
SO-782.0.0FixedSection ObjectFix double-click event, or disable
SO-792.0.0FixedSection ObjectClip gel frame
SO-802.0.0FixedSection ObjectSplit scroller frame holders and clean up default classes
SO-822.0.0FixedSection ObjectDetail class lines should explicitly set fill to None
SO-832.0.0FixedSection ObjectUpdate stacking order
SO-842.0.0ChangedSection ObjectAdd front scrollers
SO-862.0.0ChangedSection ObjectAdd clearance circle update for barrels
SO-882.0.0NEWSection ObjectUpgrade old Savvy section objects
SO-892.0.0NEWSection ObjectCode in custom yokes (mini, PAR, Desire)
SO-902.0.0FixedSection ObjectSource 4 barrels not showing
SO-912.0.0FixedSection ObjectLustr barrels -- offset back in body and move knob
SO-922.0.0FixedSection ObjectAttach data to 15:30 zooms
SO-932.0.0FixedSection ObjectAdd accessory size to S4 mini record
SO-942.0.0FixedSection ObjectSlot adjust should clear out if blank
SO-952.0.0FixedSection ObjectZooms and cycs need to get info triggered by barrel change
SO-962.0.0FixedSection ObjectSwitching Lustre from Cyc to Standard still has no barrel
SO-972.0.0FixedSection ObjectD22 and D60 front-view yokes need resizing
SO-982.0.0FixedSection ObjectSetting a catalog symbol as default before inserting the symbol can cause document tree corruption
SO-1002.0.0FixedSection ObjectReclassing groups descends into the group
SO-1012.0.0FixedSection ObjectCrash creating symbol folder from preferences dialog
SO-1032.0.0FixedSection ObjectScroller outline not getting class attributes
SO-1052.0.0FixedSection ObjectBasic preview should adjust if view is front
SO-131.0.6ChangedSection ObjectEliminated stray Symbols-Detail class
SO-141.0.6ChangedSection ObjectSettings now separates Default Class and Base Class. Default option is only for inserting new objects. Base Class, will update the class assigned to all section components that control the look of the object. Users who with to further customize the subclasses can edit the Savvy Section Subclasses.vss file.
SO-151.0.6ChangedSection ObjectYou can now apply settings to either the current file or all new files.
SO-361.0.6FixedSection ObjectWith multiple section objects selected, "Flip" only affects one of them.
SO-161.0.5FixedSection ObjectFixes an issue where parts would not load if Default Content is turned off
SO-121.0.4ChangedSection ObjectTop hats now draw in straight-on front view.
SO-111.0.4FixedSection ObjectWhen using metric units, top hats were malformed in angled front view.
SO-101.0.3FixedRegistrationRegistration numbers would not validate for some users
SO-91.0.2FixedRegistrationDemo codes can now be used with non-US systems.
SO-61.0.1ChangedSection ObjectUnderlying improvements to the About and Registration dialogs
SO-31.0.1NEWSection ObjectThe symbol folder containing a document's section parts is user definable.
SO-41.0.1NEWSection ObjectAdded a warning if the section parts file cannot be found.
SO-51.0.1NEWSection ObjectThe location of the section parts file is user definable.
SO-71.0.1NEWSection ObjectCompatible with lab licenses
SO-81.0.1NEWSection PartsThe clamp type now includes a cheeseborough type coupler
SO-1082.0.1FixedSection PartsIn-plug-in demo request uses wrong product ID
SO-1092.0.1FixedSection ObjectSavvy Symbol Section front view displaced barrel
SO-1132.0.2FixedSection ObjectUnable to Select Instrument and populate OIP
SO-232.0.2ChangedSection ObjectTop hats now draw in straight-on front view.
SO-252.0.2ChangedSection ObjectUnderlying improvements to the About and Registration dialogs
SO-312.0.2FixedSection ObjectIt's wierd, really wierd
SO-332.0.2FixedSection ObjectWhen exporting to VW2010 (I also tested with exporting to v12), the section object only appears as its insertion point. The actual section of the object doesn't appear. All of the relevant classes are turned on (Symbols-Section, etc.) I'm unsure if there is a workaround, a bug, or a limitation of the plug-in, but several theatres I draft plots for aren't using the same version of Vectorworks as I am, so if this is a limitation I probably won't be able to use this plug-in in those cases.
SO-172.0.2FixedRegistrationRegistration numbers would not validate for some users
SO-242.0.2FixedRegistrationDemo codes can now be used with non-US systems.
SO-282.0.2FixedSection ObjectWhen using metric units, top hats were malformed in angled front view.
SO-182.0.2NEWSection ObjectOne other thing that would be wonderful would be if a Savvy Section Symbol Folder was to be created in the file the first time the tool was used. Therefore any symbols used from the Section Parts file to go straight into that, and thus not populate the RB the way it currently does.
SO-192.0.2NEWSection ObjectThe location of the section parts file is user definable.
SO-212.0.2NEWSection ObjectAdded a warning if the section parts file cannot be found.
SO-222.0.2NEWSection ObjectThe section object's class is user definable. Note, you must manually change the class names in the Section Parts file.
SO-262.0.2NEWSection ObjectThe symbol folder containing a document's section parts is user definable.
SO-272.0.2NEWSection ObjectCompatible with lab licenses
SO-202.0.2NEWSection PartsThe clamp type now includes a cheeseborough type coupler
SO-612.0.2FixedInstaller“Workspace Modification Failed” error upon installation

  Home > Vectorworks > Support > View Release Notes > Source Four Savvy Section Release Notes