|
Support
|
|
Google Visualization
| Version | Status | Component | Issue |
| 3.1.0 | Fixed | Menu Command | Move to layer properly cancels |
| 3.1.0 | New | Convert to Instrument | Lighting device now includes type, wattage, weight, beam, and field angles |
| 3.1.0 | New | Convert to Instrument | Lighting Device or Symbol now drawn at the z height from the beam's position height |
| 3.1.0 | Fixed | Convert to Instrument | Adjusts for user specified grids |
| 3.1.0 | Fixed | Beam Draw PAR | Finally tracked down a hard to reproduce bug that caused beams focused to shallow angles to crash VW. |
| 3.1.0 | Fixed | Beam Draw Section | Identified a bug that could cause VW to crash in certain circumstances |
| 3.1.0 | Fixed | Beam Draw | Warning when Show Beam is unchecked |
| 3.1.0 | Fixed | Beam Draw PAR | Beam draws to floor in 3d even if show floor is unchecked. |
| 3.1.0 | Fixed | Beam Draw Section | Now responds to the Use Light Info for Selected menu command |
| 3.1.0 | Fixed | Beam Draw Section | Maximum width computation was only showing when Show Area Limits was selected |
| 3.1.0 | Changed | Convert to Instrument | Converts all beams in layer if none are selected. |
| 3.0.3 | Fixed | Beam Draw PAR | Whenever I try to draw a Par beam with Beam Draw PAR, Vectorworks will ask me for default settings; after I set them and press OK, the program crashes every time. |
| 3.0.3 | Fixed | Beam Draw PAR | When I insert a par and rotate the beam vertically VW crashes upon the final mouse click. If I insert the beam horizontally, all is fine. I even tried this on a blank document with the same results. |
| 3.0.2 | Changed | Beam Draw | Under the hood improvements to improve demo/purchase/registration, help, and to modernize dialogs. |
| 3.0.1 | Fixed | Beam Draw PAR | 3D does not draw with the correct instrument location. |
| 3.0.1 | Fixed | Beam Draw PAR | Whenever I use the Beam Draw Par tool and then try to save the file, I get a corrupted file message. This was not happening with the beta version. It is also not happening today in the same file, even when i follow the same steps (select the beam draw par tool, change the field angles, draw a par beam. Adjust the bottle and unit placement). |
| 3.0.1 | Fixed | Beam Draw | When rendering with a light, the fixture location box is not hidden. |
| 3.0.1 | Fixed | Beam Draw | Beam Draw and Beam Draw PAR were not picking up the Z height of a selected object on another layer |
|
Software announcements and updates